Low light & WDR: SC13MPA

    • 1.3MP Serial JPEG Camera Module
    • TTL/RS232/RS485 interface
    • VC0706 Protocol compatible
    • Low light and WDR 83.5db
    • High baud rate up to 460800bps


A 1.3MP highly integrated serial camera module can be connected to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.
SC13MPA module uses a CMOS color image sensor along with DSP chip that provides a low cost and low powered camera system. The module has an on-board serial interface (TTL/RS232/RS485) that is suitable for a direct connection to any host micro-controller serial or PC system COM port.
User commands are sent using VC0706 protocol that can instruct the camera to send high resolution JPEG images for storage or viewing. The SC03MPD comes in a compact format with a built in lens and a 4-Pin PH2.0 connector that provides easy access to both power and serial data.
It outputs images at 1280x960, 1280x720, 1024x768, 640×480, 320×240 or 160×120 and they’re pre-compressed JPEG images which makes them nice and small and easy to store on an SD card or transfer through serial link. Perfect for a data-logging, security, or photography project.


Options Standard Custom Options
Image Sensor 1/3'' CMOS SC1235 -----
Resolution 1.3 Mega Pixels -----
Image/Video Format Still JPEG compressed -----
Image Size (Default) 1280 x 960 1280 x 720, 1024 x 768, 640 x480, 320 x 240, 160x120
Serial Interface TTL/RS232/RS485 -----
Shutter Type Electronic rolling -----
Protocol & Connection VC0706 compatible -----
Baud Rate (Default) 115200bps (Max for RS485) 9600/19200/38400/57600/ 230400 (Max. for RS232)/460800/921600bps (Max. for TTL)
Focus Fixed Mannually adjustable
Focusing Range 20mm to infinity -----
Lens 3.6mm 1.7mm/2.0mm/2.8mm/6.0mm/8.0mm/12mm/16mm
Minimum Illumination 0.01Lux -----
IR-Cut Filter (IR Filter) 650nm 850nm/940nm/None
IR-Cut Filter Switch (Auto Switch) Default not available -----
Supplemental Illumination Default not available Removable IR LED boards
Night Vision 10 meters (33ft) -----
Power Supply DC 5V (Default) 12V DC
Cable & Connector Default with 20CM bare 4 pin wires DB9 connector, M12 or others
Waterproof Subject to housing rating -----
Power Consumption Typical: 120mA, Max: 300mA -----
Operating Temp. -4℉-140℉ (-20°C~+60°C) -----
Storage Temp. -22℉-158℉ (-30°C~+70°C) -----
Dimension 32mm x 32mm x 28mm (1.26'' x 1.26'' x 1.1'') -----
Weight 9g (0.3 OZ) -----
WDR 83.5db  




Low light & WDR: SC13MPA