High Baud Rate: SC20MPB

    • 2MP Serial JPEG Camera Module
    • TTL/RS232/RS485 interface
    • Up to 921600bps for TTL, 230400bps for RS232
    • VC0706 Protocol compatible
    • Fully Customizable


Spinel SC20MPB Camera is a highly integrated serial JPEG camera module which can be attached to any host system that requires a JPEG compressed still camera for embedded imaging applications. The module uses a 1/2.7’’ CMOS color image sensor along with a DSP chip that provides a low cost and low powered camera system. The module has an on-board serial interface (TTL/RS232/RS485) that is suitable for a direct connection to any host microcontroller UART or a PC system COM port.
The SC20MPB camera is capable of outputting JPEG format images only.
The SC20MPB camera module comes in a compact form factor with a built in lens and a 4 pin PH 2.0 connector that provides easy access to both power and serial data. PC test tool is provided for easy testing.
There is a locking screw on the barrel of the lens holder, which is used to lock the focus in place once set, to prevent it from inadvertently being changed.
The SC20MPB camera has decent low light and WDR performance, supports high baud rate 921600 bps for TTL interface, and 230400bps for RS232 interface for faster image transfer.


Options Standard Custom Options
Image Sensor 1/2.7'' CMOS -----
Resolution 2 Mega Pixels -----
Image/Video Format Still JPEG compressed ONLY -----
Image Size (Default) 1920x1080 1280x960, 1280 x 720, 1024x768, 640 x480, 320 x 240, 160x120
Serial Interface TTL/RS232/RS485 -----
Shutter Type Electronic rolling -----
Protocol & Connection VC0706 compatible -----
Baud Rate (Default) 115200bps options 9600/19200/38400/57600/ 230400 (Max. for RS232)/921600bps (Max. for TTL)
Focus Fixed Mannually adjustable
Focusing Range 20mm to infinity -----
Lens 3.6mm 2.1mm/2.8mm/6.0mm/ 8.0mm/12mm/16mm/25mm available
Minimum Illumination 0.01Lux -----
IR-Cut Filter (IR Filter) 650nm 850nm/940nm/None
IR-Cut Filter Switch (Auto Switch) Default not available Customized upon request
Supplemental Illumination Default not available Removable IR LED or white light LED boards
Night Vision Max. 10 meters (33ft) -----
Power Supply DC 5V(Default) 12V DC
Cable & Connector Default with 20CM bare 4 pin wires DB9 connector, M12 or others
Waterproof Subject to housing rating -----
Power Consumption Typical: 160mA, Max: 300mA -----
Operating Temp. -4℉-140℉ (-20°C~+60°C) -----
Storage Temp. -22℉-158℉ (-30°C~+70°C) -----
Dimension 32mm x 32mm x 25mm (1.26'' x 1.26'' x 0.98'') -----
Weight 9g (0.3 OZ) -----




High Baud Rate: SC20MPB